System product technology-MVR evaporation system
The MVR evaporation system uses a compressor to increase the energy of the secondary steam, utilizes the increased energy of the secondary steam, and recovers the latent heat of the secondary steam. Specifically: the secondary steam generated by the evaporator is adiabatically compressed by the compressor to increase its pressure and temperature, and then sent as heating steam to the heating chamber of the evaporator to condense and release heat, and the latent heat of the steam is recycled. Before entering the evaporator, the cold material absorbs the heat of the condensed water through the h
System product technology-PCW process unit
System product technology-PCW process unit PCW(process cooling water) Process cooling water is also called process circulating cooling water system or process cooling water system. System principle: The PCW system consists of two relatively independent systems: chilled water (primary side, provided by the refrigeration unit) and cooling water (secondary side, used for cooling water for production line equipment/machine). Through a precise control system, Chilled water and cooling water exchange heat, and finally the cooling water is cooled t
Service product technology-Heat exchange system operation and maintenance management platform
1. Collect and display parameters such as temperature, pressure, flow, heat, operating status, etc. 2. Push alarm information in real time; 3. Water pump control, electric regulating valve and other control interlock protection; 4. Energy consumption analysis; 5. expert diagnosis; 6. Statistical analysis: free reports, real-time curves, bar charts, pie charts; 7. Operation and maintenance authority management; 8. Cloud data access, data processing, data computing, data storage and data exch
Brazed plate heat exchanger Notes and FAQs
Brazed plate heat exchangers should not be installed where there is strong vibration, cyclic pressure or temperature changes. If there is a potential risk of vibration in the installation, a shock absorbing device should be added to ensure that vibration is not transmitted to the brazed plate heat exchanger. Pay attention to the maximum load that the pipe connections can withstand. When the evaporation temperature under operating conditions is close to the liquid temperature on the refrigeration side, corresponding antifreeze measures need to be taken.
System product technology-Desalination system
The seawater desalination system is a process that uses MVR technology to evaporate circulating seawater to produce secondary steam condensation to condense fresh water. The concentrated seawater is discharged after salt removal, and the condensed fresh water is treated with chemicals to form domestic water. main application •For special occasions such as islands far away from the mainland that lack energy, offshore operating platforms, maritime emergency rescue, scientific expeditions and short-term small amounts of seawater desalination needs.
Application of low-temperature waste heat power generation
Low-temperature waste heat power generation uses the principle of the Organic Rankine Cycle (ORC), which uses low-boiling point organic matter as a working fluid to absorb heat from the waste heat through a heat exchanger to generate steam with a certain pressure and temperature, which enters the turbine machinery to expand and perform work. It drives the generator to generate electricity, and then releases heat to the cold water through the condenser, and this cycle continues. Our company operates heat exchanger products: plate heat exchanger, Heat exchange unit, welcome
Service product technology-Online cleaning technology
It integrates gas-water pulse cleaning, dosing chemical cleaning and automatic control technology. It uses electromagnetic pulse, gas-liquid oscillation, hydraulic conversion and other methods to simulate the high-speed water impact generated by the "cavitation" phenomenon of gas-liquid pulse. The large wave and air-water rinsing effect of the washing machine can quickly and effectively peel off sediment and dirt, and dissolve the dirt through the cleaning fluid to solve problems such as scaling and blockage of the heat exchanger, and achieve efficient cleaning of the heat exchanger without di
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
